Course Information
SemesterCourse Unit CodeCourse Unit TitleT+P+LCreditNumber of ECTS Credits
2KYT110Damage Analysis And Material Inspections3+0+035

Course Details
Language of Instruction Turkish
Level of Course Unit Associate Degree
Department / Program Welding Technology
Mode of Delivery Face to Face
Type of Course Unit Compulsory
Objectives of the Course To provie a wide range of information on destructive and nondestructive testing methods and their applications.
Course Content Destructive testings; Hardness, Tensile, Impact, Fatigue, Creep, Torsion, Bending and Wear and non-destructive testings; Liquid penentration, Radiographic, Magnetic-particle, Ultrasonographic methods. Microstrucral evaluations; SEM, TEM, XRD, AFM analysis.
Course Methods and Techniques
Prerequisites and co-requisities None
Course Coordinator None
Name of Lecturers Asist Prof.Dr. Polat TOPUZ
Instructor Zeynep Sueda Basar sueda.basar@gedik.edu.tr
Assistants None
Work Placement(s) No

Recommended or Required Reading
Resources Compile lecture notes from internet and textbooks
description of the subject application, the question-and-answer
konu anlatımı, uygulama, soru-cevap
ara sınav, yarıyıl sonu sınavı

Course Category
Mathematics and Basic Sciences %20
Engineering %25
Engineering Design %10
Science %25
Field %20

Planned Learning Activities and Teaching Methods
Activities are given in detail in the section of "Assessment Methods and Criteria" and "Workload Calculation"

Assessment Methods and Criteria
In-Term Studies Quantity Percentage
Mid-terms 1 % 40
Final examination 1 % 60
Total
2
% 100

 
ECTS Allocated Based on Student Workload
Activities Quantity Duration Total Work Load
Course Duration 14 4 56
Hours for off-the-c.r.stud 14 2 28
Mid-terms 1 15 15
Laboratory 5 5 25
Final examination 1 15 15
Total Work Load   Number of ECTS Credits 5 139

Course Learning Outcomes: Upon the successful completion of this course, students will be able to:
NoLearning Outcomes
1 It can express destructive and non-destructive inspection methods.
2 Analyzes of industrial applications, in-situ thinning, presentation.
3 Learn about material inspection standards.


Weekly Detailed Course Contents
WeekTopicsStudy MaterialsMaterials
1 Classification of material tests applied in engineering and general definitions
2 Introduction and classification of destructive examinations
3 Metallography concept, microscopy, macroscopy, replica
4 Classification and properties of microscopes
5 Hardness tests and applications of metallic materials
6 Impact tests of metallic materials, Charpy and Izod methods
7 Bending test of metallic materials
8 Tests applied to metallic pipes (expansion-flattening)
9 Midterm
10 Tensile testing and application of metallic materials
11 Introduction and classification of non-destructive examinations
12 Ultrasonic İnspection method
13 Radiographic inspection method
14 Magnetic particle and liquid penetrant inspections
15 visual inspection method and General repetition of lesson plan
16 Semester final exam


Contribution of Learning Outcomes to Programme Outcomes
P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14
All 5 5 5 4 4
C1
C2
C3

bbb


https://obs.gedik.edu.tr/oibs/bologna/progCourseDetails.aspx?curCourse=114348&curProgID=36&lang=en